Automobile lamp sealant
Product characteristics and applications:
DTT-378M-2X is a one-component, room temperature cured silicone rubber, which belongs to dealcoholization curing, with very low volatile organic matter, odorless after complete curing, excellent bonding performance, excellent high and low temperature resistance, and little change in performance in the range of -50 ~ + 200 ~C.
DTT-378M-2X is mainly used for bonding and sealing of lighting, various glass, aluminium, engineering plastics, automobiles and building materials; it has good bonding properties with most materials (glass, aluminium, ceramics, ABS, PBT, PET, PVC and PC), and generally does not use undercoat.
Main technical parameters:
Projects | Detection standard | Detection result |
Model | / | DTT-378M-2X |
Appearance | Visual | Black, white, grey |
Liquidity | / | Liquidity |
tack free（min） | ℃ | 15 |
Density（g/ml） | GB/T533-2008 | 1.4 |
hardness/ Shore A | GB/T531.1-2008 | 32±2 |
Tensile strength/MPa | GB/528-2009 | 1.8 |
elongation at break/% | GB/528-2009 | 400 |
volume resistivity/Ω.cm | GB/1692-2008 | 3.0*1014 |
operating temperature range | / | -50～200 oC |
Dielectric constant（50Hz） | GB/1693-2007 | 3.0 |
Relevant certification | / | ROHS、No halogen, no sulfur |
Memory | Store in a cool and dry place at 5 ℃ ~ 25 ℃ for 6 months from the date of production | |
Note: All the above performance data are obtained at 25, 2 C and 50, 5% relative humidity.
Usage method:
1) Clean surface: Clean up the surface of the sticky or coated material, remove rust, dust and grease, etc.
2) Sizing: Cut off the cap of rubber hose, cover the tip (cut the tip to the appropriate size), squeeze the glue onto the clean surface with a rubber gun, make it evenly distributed, and close and fix the adhesive surface.
3) Curing: Place the coated parts at room temperature and let them self-curing. The curing process of this adhesive is a gradual curing process from outside to inside. Under room temperature and 50% relative humidity, the depth of curing will be about 2-4 mm in 24 hours. When the temperature is low or the humidity is low, the curing time will be prolonged.
4) After the operation is completed, the unused glue should be sealed and stored. When used again, if there is a little crust at the seal, it can be removed without affecting normal use.
Storage, transportation and precautions:
1) Keep away from children. If you touch your skin carelessly, wipe it clean, then rinse it with clean water; if you touch your eyes carelessly, rinse it with clean water immediately and go to the hospital for examination.
2) The product should be sealed and stored in a cool, dry and ventilated place (5 25 C) to prevent rain and sunlight exposure.
3) In normal storage environment, the storage period is 6 months.
4) After opening, the product should be used up as soon as possible. The unused product should be sealed and put in a safe place.
5) This product is non-dangerous and can be stored and transported according to general chemicals.
Packing specification:
The product is packed in plastic pipes with 300 ml/branch (24 pieces/case) and 2600 ml/branch (4 pieces/case).
Warm Tip: Thank you for your trust and support in our company's products. Because of the diversity of practical applications, we can not grasp the application conditions. So users should test before using to confirm whether they meet your requirements and avoid unnecessary waste and loss. Our company does not guarantee any problems arising from the use of our products under specific conditions and does not assume any direct, indirect or accidental liability. If you have any questions, please contact us and we will answer them personally.
- Before: Null
- After: Automobile lamp sealant
Chat